Wand met Mammut 350

De Mammut 350 wandbekisting voor stortwerk dat een groot oppervlak beslaat. De Mammut 350 wandbekisting voor stortwerk dat een groot oppervlak beslaat. Mammut 350 draagt over het hele oppervlak 100 kN/m² en is met zijn symmetrische ankerpunten en de massieve kunststof bekistingsplaat alkus uitermate geschikt voor zichtbetonwerk.

Verder onderaan op deze pagina vindt u de artikelen die u nodig heeft als u een wand met Mammut 350 wilt bekisten. Denk er aan dat het aantal artikelen voor elk bouwproject kan verschillen. Gebruik het formulier en neem even contact met ons op als u exact wilt weten hoeveel onderdelen u nodig heeft.

Op de productpagina vindt u alles over onze sterkste wandbekisting Mammut 350 .

Downloads voor Mammut 350 wandbekisting

Contactformulier

 
 
 

Of neem rechtstreeks contact met ons op.

 

Artikellijst

 
 
Bekisting
Verankering
Ondersteuning
Veiligheid
 
 
  • RS-assembly lock

    Galvanized, to tightly connect and align Radius panels. Clamping length is 119 to 205 mm for stepless compensation. 2... 

  • Combi-lock with coupling

    Galvanized; to attach the push-pull props at the panel joint of the wall formwork AluStar, StarTec, Mammut, Mammut 350 and... 

  • Combi-lock with coupling

    Galvanized. Is used to attach the push-pull props at the panel joint of the wall formwork AluStar, StarTec, Mammut and... 

  • Flange screw

    Galvanized. DW thread Ø 15 mm. Is used to attachthe Circo scaffolding brackets to a semi-circular column half. Length of... 

  • M-Cross stiffener 44

    Galvanized. In connection with support frames STB 300 it is used as a tie-beam to transfer the load from the support frame... 

  • Corner angle 40/60

    Galvanized. Side lengths 40 and 60 cm. For inside and outside corners. 

  • M outside corner bracket

    Galvanized. Provides together with AS/ST panels and flange screw 18 it provides a tight outside corner assembly. Primarily... 

  • Uni-tie claw

    Galvanized. Permits tieing directly above or beside the panels. Is suited for panels with a frame profile width of 40 mm... 

  • Transport angle 12

    Is used to stack and transport 5 to 12 frame formwork panels with a construction height of 12 cm and 12 cm hole distance.... 

 
 
  • Coupling nut

    With DW thread; DIN 18216. Connects tie rods to the anchor loop when length extension is necessary. Admissible load in kN... 

  • Spanner

    Inset yellow chromated. Spanner width (SW) 27 mm. Is used to tighten and loosen flange nuts 100, articulated flange nuts... 

  • Drive nut 60

    Galvanized. DW thread Ø 15 mm, plate Ø 60 mm. Adm. load capacity 90 kN (DIN 18216). Is used to tie the formwork to the... 

  • Pressure gauge

    Not shown. Measures tractive force of anchors from 250 to 400 kN. Includes compensating plate for tie rods, with 50 mm hole... 

  • Trolley for foundation tape

    Not shown. Is used to transport and cut foundation tapes to length. Suitable for one roll Pneumatic wheels. 

  • M-Cross stiffener 44

    Galvanized. In connection with support frames STB 300 it is used as a tie-beam to transfer the load from the support frame... 

  • Cone for plastic tube

    Available with 10 mm or 30 mm covering . 

  • Plug

    Is used to close tie holes in the wall when plastic tubes D22 or D30 are applied. Two plugs are required per tie hole.  

  • Water stop

    Uncoated. Lost part for tie rods DW 15 and DW 20 to produce watertight tie holes. Adm. load capacity depends on diameter: Ø... 

  • Stop end fixture 23/40 yellow

    Yellow chromated. Is used to attach alignment rails to the panels when forming stop ends are formed. Or is used in... 

  • Uni-tie claw

    Galvanized. Permits tieing directly above or beside the panels. Is suited for panels with a frame profile width of 40 mm... 

  • Pressure gauge

    Not shown. Measures tractive force of anchors from 250 to 400 kN. Includes compensating plate for tie rods, with 50 mm hole... 

 
 
  • Side railing

    Galvanized. Is plugged into the walkway bracket. 

  • Ladder

    Galvanized. Is hooked into the CF-access platform and automatically secured. Can be extended with extension ladders. Safety... 

  • Push-pull prop R

    Galvanized. Garantee tensile and compression strength. Align and brace wall formwork. Foot plates and... 

  • Brace frame 250

    Galvanized. Aligns and braces the formwork. Available with or without formwork-prop connector. Consists of a push-pull prop... 

  • Formwork-prop connector

    Galvanized. Connects braces, brace frames and push-pull props (max. Ø 48 mm) to the multi-function profile (with a flange... 

  • Universal joint connector 76/135

    Galvanized. With head bolt 16/90 and cotter pin 4. Is used to attach push-pull props to vertical or horizontal panel joints... 

  • Articulated foot plate

    Galvanized. With head bolt 16/90 and cotter pin 4. For push-pull props and braces of up to Ø 57 mm. 

  • Double-jointed foot plate

    Galvanized. With head bolt 16/90 and cotter pin 4. Serves as foot plate for brace frames 250 and as connector for braces and... 

  • Formwork-prop connector

    Galvanized. Is used to connect braces, brace frames and push-pull props (max. Ø 48,3 mm) to the multi-function profile with... 

  • Cotter pin 4

    Galvanized. Locks the head bolt. 

  • Triplex R

    Galvanized. Braces and aligns wall and column formwork exceeding 6,00 m. Is delivered in modules and assembled on site to... 

  • Triplex intermediate pieces R

    Galvanized basic components of different lengths to build Triplex R units. Tube Ø 33,7 mm. Delivery includes the required... 

  • Top unit 48

    Galvanized. With adjustable spindle (Ø 48,3 mm). 1 top unit 48 left and 1 top unit 48 right are required to assemble a... 

  • Foot plate 48

    Galvanized. Particularly solid foot plate for braces up to Ø 48,3 mm such as Triplex R. Delivery includes head bolt 16/90... 

  • Triplex SB

    Galvanized. Triplex SB braces are primarily used for additional load transfer when forming single-sided walls of 6,00 m or... 

  • Foot plate 73

    Galvanized. Particularly sturdy foot plate for Triplex SB. Delivery includes screw M30x150 and nut M30. 

  • Flange screw

    Galvanized. DW thread Ø 15 mm. Is used to attachthe Circo scaffolding brackets to a semi-circular column half. Length of... 

Vanaf een storthoogte van 2 m dient er altijd een een vierdelige zijdelingse bescherming aan het stortplatform te worden aangebracht.

Met de MEVA veiligheidssysteem kunt u uw bouwterrein modulair en individueel beveiligen. Kijk voor meer informatie op de Veiligheidssystemen pagina en neem voor voor advies contact op met MEVA.

  • Guard-railing post

    Galvanized. Is plugged into the walkway bracket. 

  • Guard-railing post 48

    Galvanized. With manifold to attach it to the walkway bracket, designed with tube Ø 48 mm to attach tube couplers. 

  • Support guard 800-railing post

    Galvanized. For the side protection at all MEVA wall formwork systems. Allows the extension for guard-railing KLK 230 and... 

  • Scaffold tube

    Galvanized. Is used as hand-rail / mid-rail in combination with guard-railing post 48. 

  • Plastic tube

    Is used as a plastic sleeve for a tie rod that is to be recovered and re-used. 2 m long.  

  • Planing cap DW

    Hard foam, 10 cm long, 45° end piece. For DW 15 and DW 20. Is plugged onto the DW tie rod or on a plastic sleeve for... 

  • Spiral anchor DW 15/100

    Steel spiral bead, 10 cm long, with styropore core. Is used to attach formwork equipment with tie rods DW 15, e.g. when... 

  • Folding access platform BKB 125

    Self-locking; ready-made platform with a foldable guard-railing and an overall width of 125 cm; it is supsended onto the... 

  • Folding access platform BKB 125/140

    It is used for inside corner configurations and length adjustments. In the latter case a side railing BKB 125 and two (2)... 

  • Side railing BKB 125

    Galvanized. Suited as side railing for all folding access platforms or as guard-railing for platform BKB 125/140. Is... 

  • Walkway bracket

    Galvanized, yellow, pluggable. Is used as a working and safety scaffold. Is attached to the multi-function profile and... 

  • Side railing

    Galvanized. Is plugged into the walkway bracket. 

  • Walkway bracket SB

    Galvanized. Is attached with 1 flange screw 28 and 1 flange screw 18 to the DW-threaded nuts of the panel’s multi-function... 

  • Walkway bracket 880 SB

    Galvanized. Is attached with 1 flange screw 28 and 1 flange screw 18 to the DW-threaded nuts of the panel’s multi-function... 

  • Alu(minium) platform M SB

    Aluminium support construction with slip-free corrugated aluminium sheet. Working width 75 cm. Admissible load 200 kg/m².... 

  • Alu(minium) platform M 1690 SB

    Inside corner platform. Usable for Mammut 350 and Mammut panels that are 250 cm wide. Aluminium support construction with... 

  • Alu(minium) platform M 2470 SB with hatch

    Aluminium support construction with slip-free corrugated aluminium sheet. Working width 75 cm. Admissible load 200 kg/m².... 

  • Alu platform outside corners SB

    Aluminium support construction with slip-free corrugated aluminium sheet. Is placed onto 2 Walkway brackets SB and on the... 

  • Protection bracket SB

    The protection bracket SB is plugged into the aluminium platform and attached to the wooden compensation platform with two... 

  • Support for wooden platform

    Galvanized. Is used to attach a wooden platform to the walkway bracket SB. The support is screwed to the wooden platform and... 

  • Compensation sheet

    Bridges gaps up to 135 cm of 75 cm wide. 

  • Compensation covering 570 plugable

    Pluggable. Bridges gaps up to 40 cm wide. 

  • Front guard-railing post SB 10

    Not shown. Galvanized. Is used together with a scaffold tube to create a handrail. The front guard-railing post SB 10 is... 

  • Front railing post SB retractable

    Galvanized, dia. 48.3 mm. Is used to install a retractable front railing SB made of scaffold tubes. On the facing side of... 

  • Support railing post SB, retractable

    Galvanized. Is used for the retractable front railing SB made of scaffold tubes. The support is attached to the walkway... 

  • Support for guard-railing post IC SB

    Galvanized. Is used for the attachment of a front guard-railing post. Is attached to the multi-function profile of the wall... 

  • Support for guard-railing post OC SB

    Galvanized. Is placed onto 2 Walkway brackets SB and secured to the Alu platform outside corners SB with the integrated pin. 

  • Scaffold tube SB

    Galvanized. Is used to assemble front railings for SecuritBasic aluminium platforms.  

  • Swivel-joint coupler 48/48

    Galvanized. Connects 2 scaffold tubes with 48,3 mm Ø at any angle.