Skydiving center requires special singled-sided solution

Project: Skydiving center in Berlin

Builder: Indoor Skydiving Berlin GmbH, Gladbeck

Contractor: CONEX Baugesellschaft, Berlin

MEVA Systems: Wall formwork StarTec,Shoring tower MEP, Stab formwork MevaFlex,Support frame 450, Heavy-duty
braces Triplex

Engineering and support: MEVA Formwork Systems, Berlin



Floating High Over Deep Ground

One of the latest thrills: Float like a bird at a skydiving center, where an artificial airstream will keep you up in the air.It is generated by a powerful turbine located in a special housing. Flying and floating takes place inside a tower.

15 m deep using support frames STB 450 and a special bracing

The skydiving center that is being built in the green outskirts of Berlin has a tower with a 15 m deep basement that is required for the airstream. After the bored piled walls had been installed, the earth was excavated and the slab base poured. The next step was pouring the walls for the three basement levels in three cycles, each 5 m high. The enormous pressure of the earth onto the bored piles walls required a special bracing when climbing the basement walls single-sided with the STB 450 support frame. Steel tubes were attached crosswise and steel beams along the bored piled walls and in the corners to stabilize and support them.

Completely smooth architectural concrete surface required

The walls‘ concrete surface must be completely smooth to avoid any swirls and turbulences in the airstream. A maximum tolerance of 10 mm was permitted per 5 m length. The panels‘ alkus facing delivered the required surface quality with each pour.

Tobias Stiller

“The robust panels and the alkus
all-plastic facing made sure we
kept the tolerance and met the
requirements without any hassle,“
confirms foreman Tobias Stiller.

  • MEVA Expertise & References

    MEVA Expertise & References

    Referencen for Projets in Commercial & Residential Construction, Architectural Construction, High-Rise Construction and Civil Engineering Construction

  • MEVA32 shoring continues to perform in new mixed-use developments

    MEVA32 shoring continues to perform in new mixed-use developments

    Multi-family housing, retail, and garaging facilities all benefit from the smart design and features of the new MEVA32 shoring

  • Large construction site in the heart of Budapest

    Large construction site in the heart of Budapest

    MEVA fulfils stringent requirements with flexible formwork solutions. The Budapest Zoo & Botanical Garden is one of the Hungary’s most popular cultural attractions.

  • Challenging tunnel geometry

    Challenging tunnel geometry

    MEVA STB 450 offers flexible solution for narrow, inclined rail section: Near the municipality of Gretzenbach, the four-track route branches into two separate lines. Here, the two southern tracks gradually descend and pass below the cantonal road before entering the new Eppenberg Tunnel.

All Plastic Facing alkus
MEVA Frame Profile
... more than just formwork
  •  Select language

    Select continent and country. Language selection optional.

  •  Contact
  •  Search

    Search on our website.

  •  Newsletter

    Subscribe to our monthly newsletter.